UNSATURATED POLYESTER RESIN

Product Details:

Polyester resins are unsaturated synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Maleic Anhydride is a commonly used raw material with diacid functionality. Polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of laser printers. Wall panels fabricated from polyester resins reinforced with fiberglass—so-called fiberglass reinforced plastic (FRP)—are typically used in restaurants, kitchens, restrooms and other areas that require washable low-maintenance walls. They are also used extensively in cured-in-place pipe applications. Departments of Transportation in the USA also specify them for use as overlays on roads and bridges. In this application they are known as PCO Polyester Concrete Overlays. These are usually based on isophthalic acid and cut with styrene at high levels

Additional Information:

• Item Code: GCPL1000
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Gelcoat or ''Gel Coat'' is a material used to provide a high-quality finish on the visible surface of a fibre-reinforced composite. The most common gelcoats are thermosetting polymersbased on epoxy or unsaturated polyester resin chemistry

Additional Information:

• Item Code: GCPL1020
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

• Very good high-temperature stability
• Resistance to a wide variety of corrosive environments
• Tough, crack and stress-fatigue resistant laminates
• Can be used in potable (drinking) water applications
• Extended shelf life
• Improved glass fiber wet-out
• Consistent batch-to-batch performance
• Excellent for use in vacuum infusion and Cured-In- Place Pipe (CIPP) applications that require extended working time at ambient temperatures (Lateral Lining & Point Repair)

Additional Information:

• Item Code: GCPL3010
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Vinyl esters based on bisphenol-A epoxy also have quite good alkaline resistance, for example DION® 9100, 9200, or 9102. Care should be taken with vinyl esters based on novolac epoxy. The alkaline resistance of novolac resins is fair, but with strong bases at high temperature phenolate salts can form which lead to laminate destruction

Additional Information:

• Item Code: 9400
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Unsaturated polyesters arecondensation polymersformed by the reaction ofpolyols(also known aspolyhydric alcohols),organic compoundswith multiple alcohol or hydroxy functional groups, with saturated or unsaturated dibasic acids. Typical polyols used areglycolssuch asethylene glycol; acids used arephthalic acid,isophthalic acidandmaleic acid. Water, a by-product ofesterificationreactions, is continuously removed, driving the reaction to completion. The use of unsaturated polyesters and additives such asstyrenelowers the viscosity of the resin. The initially liquid resin is converted to a solid bycross-linkingchains. This is done by creatingfree radicalsat unsaturated bonds, which propagate in achain reactionto other unsaturated bonds in adjacent molecules, linking them in the process. The initial free radicals are induced by adding a compound that easily decomposes into free radicals. This compound is usually and incorrectly known as thecatalyst.Initiator is the more correct term. Substances used are generally organic peroxides such asbenzoyl peroxideormethyl ethyl ketone peroxide.

Additional Information:

• Item Code: GCPL2020

Product Details:

We are the leading supplier of GCPL 1000 resinmade available to our clients at competitive prices.

Clear pilyster resin for frp moulding

Product Details:

Unsaturated polyesters arecondensation polymersformed by the reaction ofpolyols(also known aspolyhydric alcohols),organic compoundswith multiple alcohol or hydroxy functional groups, with saturated or unsaturated dibasic acids. Typical polyols used areglycolssuch asethylene glycol; acids used arephthalic acid,isophthalic acidandmaleic acid. Water, a by-product ofesterificationreactions, is continuously removed, driving the reaction to completion. The use of unsaturated polyesters and additives such asstyrenelowers the viscosity of the resin. The initially liquid resin is converted to a solid bycross-linkingchains. This is done by creatingfree radicalsat unsaturated bonds, which propagate in achain reactionto other unsaturated bonds in adjacent molecules, linking them in the process. The initial free radicals are induced by adding a compound that easily decomposes into free radicals. This compound is usually and incorrectly known as thecatalyst.Initiator is the more correct term. Substances used are generally organic peroxides such asbenzoyl peroxideormethyl ethyl ketone peroxide.

Additional Information:

• Item Code: GPR
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

We are offering Westin Resin.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

clear casting resin for embedding and casting paperweights, specimens  table top wash basin arctecture purpose and clear statue etc.

Additional Information:

• Item Code: GCPL1015
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Polyester resins are unsaturated synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Maleic Anhydride is a commonly used raw material with diacid functionality. Polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of laser printers. Wall panels fabricated from polyester resins reinforced with fiberglass—so-called fiberglass reinforced plastic (FRP)—are typically used in restaurants, kitchens, restrooms and other areas that require washable low-maintenance walls. They are also used extensively in cured-in-place pipe applications. Departments of Transportation in the USA also specify them for use as overlays on roads and bridges. In this application they are known as PCO Polyester Concrete Overlays. These are usually based on isophthalic acid and cut with styrene at high levels
SPECIALLY USE FOR FRP DOOR LAMINATION

Additional Information:

• Item Code: GCPL1005
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Unsaturated polyesters are condensation polymers formed by the reaction of polyols (also known as polyhydric alcohols), organic compounds with multiple alcohol or hydroxy functional groups, with saturated or unsaturated dibasic acids. Typical polyols used are glycols such as ethylene glycol; acids used are phthalic acid, isophthalic acid and maleic acid. Water, a by-product of esterification reactions, is continuously removed, driving the reaction to completion. The use of unsaturated polyesters and additives such as styrene lowers the viscosity of the resin. The initially liquid resin is converted to a solid by cross-linking chains. This is done by creating free radicals at unsaturated bonds, which propagate in a chain reaction to other unsaturated bonds in adjacent molecules, linking them in the process. The initial free radicals are induced by adding a compound that easily decomposes into free radicals. This compound is usually and incorrectly known as the catalyst.Initiator is the more correct term. Substances used are generally organic peroxides such as benzoyl peroxide or methyl ethyl ketone peroxide.

Additional Information:

• Item Code: GCPL2010
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

We are offering GCPL 1013 Resin. FIRE RETRATANT RESIN

Additional Information:

• Item Code: GCPL1013

Product Details:

Unsaturated polyesters arecondensation polymersformed by the reaction ofpolyols(also known aspolyhydric alcohols),organic compoundswith multiple alcohol or hydroxy functional groups, with saturated or unsaturated dibasic acids. Typical polyols used areglycolssuch asethylene glycol; acids used arephthalic acid,isophthalic acidandmaleic acid. Water, a by-product ofesterificationreactions, is continuously removed, driving the reaction to completion. The use of unsaturated polyesters and additives such asstyrenelowers the viscosity of the resin. The initially liquid resin is converted to a solid bycross-linkingchains. This is done by creatingfree radicalsat unsaturated bonds, which propagate in achain reactionto other unsaturated bonds in adjacent molecules, linking them in the process. The initial free radicals are induced by adding a compound that easily decomposes into free radicals. This compound is usually and incorrectly known as thecatalyst.Initiator is the more correct term. Substances used are generally organic peroxides such asbenzoyl peroxideormethyl ethyl ketone peroxide.

Additional Information:

• Item Code: GCPL1012

Product Details:

Being A Well-renowned Entity, We Are Engaged In Providing A Distinguished Range Of Tooling Gelcoat.
Vinlester Tooling Resin And Gelcoate By Reichhold India Ltd

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

• Very good high-temperature stability
• Resistance to a wide variety of corrosive environments
• Tough, crack and stress-fatigue resistant laminates
• Can be used in potable (drinking) water applications
• Extended shelf life
• Improved glass fiber wet-out
• Consistent batch-to-batch performance
• Excellent for use in vacuum infusion and Cured-In- Place Pipe (CIPP) applications that require extended working time at ambient temperatures (Lateral Lining & Point Repair)

Additional Information:

• Item Code: DION9100
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Unsaturated polyesters are condensation polymers formed by the reaction of polyols (also known as polyhydric alcohols), organic compounds with multiple alcohol or hydroxy functional groups, with saturated or unsaturated dibasic acids. Typical polyols used are glycols such as ethylene glycol; acids used are phthalic acid, isophthalic acid and maleic acid. Water, a by-product of esterification reactions, is continuously removed, driving the reaction to completion. The use of unsaturated polyesters and additives such as styrene lowers the viscosity of the resin. The initially liquid resin is converted to a solid by cross-linking chains. This is done by creating free radicals at unsaturated bonds, which propagate in a chain reaction to other unsaturated bonds in adjacent molecules, linking them in the process. The initial free radicals are induced by adding a compound that easily decomposes into free radicals. This compound is usually and incorrectly known as the catalyst.Initiator is the more correct term. Substances used are generally organic peroxides such as benzoyl peroxide or methyl ethyl ketone peroxide.

Additional Information:

• Item Code: GCPL1011

Product Details:

Firepel K 133-AAA-00

Product Details:

ISO RESIN

Product Details:

Ril xpr 6120 ortho clear resin

Additional Information:

• Minimum Order Quantity: 220 Kg

Additional Information:

• Minimum Order Quantity: 225 Kg